The Log Cabin Man Quilt part II

 

 

So here is a finished block, it’s a pretty easy block to put together.  To the right is a simple picture of the block. 

So with this one little block we can make many different larger blocks.

 

 

  So in my search for layouts I found this one above in a large star pattern.

I also started playing with some of my squares, this one I did a chevron pattern.

Diagonal stripe.

And Boxes, I like this one and a simple layout.

for my quilt I’m doing a large box of sorts. In the center you start with a small box and make concentric boxes outwards. I’ve put a couple of pictures(above) so you can sort of see what i mean.  For the next post I’ll show how I’ve been working the quilt top together.

The Man Quilt Update

Well I'm a bad llama, I've been working on my next post for the Man Quilt when i discovered some measurement issues and some missing blocks.  SO ... I went looking for the fabric I had set aside from when i was originally making the blocks, only to find that I have no idea where they where put during the the last round of  'Spring cleaning'.  So off I went to the local thrift shop to restock.  I was in luck, home I came with a dozen or so new shirts and set to work making the required blocks.  So now I have 12 blocks give or take sitting on my sewing machine.  I got a little distracted reading .. I had decided to find out what all the fuse was about the Fifty Shades of Grey trilogy, made it through the first book in 2 days.  Not my typical book of choice when it comes to reading but I enjoyed it and went and got the second one from the library the same day... and again had it done in 2 more days, and my poor quilt pieces sit lonely on my desk waiting for more attention.  Okay so now on my fifth day of distraction and I'm trying to get my hands on the last book of the set ... and would you believe it all the copies are out!!  With the book on reserve I set back to work on my blocks once again only to be interrupted yet again. This time it's my back .. can you believe it ...I've thrown my back out and haven't been able to sit at the sewing machine for two days so far and I have no book to keep me busy AARRGG!! I did download the preview to my e-reader ( one chapter is what i got) So now I lay in bed on an itty bitty laptop typing this brief message for my few readers.  Hopeful that maybe tomorrow I can manage sitting at my desk for a bit.

The Log Cabin Man Quilt part 1

This has been an ongoing project due to its size.  When finished it should be about queen size,  aprox 90 X 108 inches for.  Each block is about 7.5 in. finished and there is a lot of blocks.  The whole quilt is made out of old dress shirts.  As with all my up-cycle project I cut them apart so they’re easer to work with.



So I started with some sketches, this is the one I’m using for  laying out the finished pieces so it is not to fancy, just coloured pens and some highlighters.  The pattern drawings have gone miss at the moment.  So log cabin I thought would be a good block the use.. a nice manly square right? Any who…  I set to work collecting what I’d hoped would be enough shirts to make the entire quilt top. I used about 15 shirts or so and a 1/2 meter piece of red cotton for the centers (could not find and red shirts for the life of me at the time.)



 


Next I cut out a crap load of 2in. squares out of the red for the centers (there is about 100 finished squares) and I did a few pieces at a time for the strips of each colour and threw them into a bucket I keep beside my desk, the strips are 1 1/4 inches wide, and I left them in long strips instead of trimming them to size.  When the bucket was full I would sew some squares.

  
 
I left the 1 1/4 in. strips long so I could run them through the machine one after the other in a long chain, and when on ran out I would grab another out of the bucket at random and continue on.  Making sure to grab the right colour 2 blue then 2 white ect…





So I did this many many more times. After each row you have to cut apart the chains, I used my handy dandy quilting ruler to make sure I was square as I went.  and pressing the seams before attaching the next row. I did 3 rows of each blue and white







Here are a few of the finished blocks all trimmed up and ready to go.  In part 2 I’ll show you some of my layout ideas.

Until next time!

Little mans boxer briefs

 

    My little man asked for some more boxers the other day, so i asked if he would like me to make him some boxer briefs.  So he ran to find a donor pair from his drawer that where getting a little small.  so we set to work  carefully cutting them apart along the seam lines.  So I found the easiest way to trace around the fabric “pattern pieces” is to put down a piece of cardboard, large enough to for your largest pattern pieces.  On top of the cardboard I put down a piece of paper (i use Kraft paper, used for wrapping packages and come in a roll like wrapping paper) and carefully pin the pieces out flat and trace around them with a pencil.  Now I use my snazzy rulers and make clean lines, because we want them a little bigger I add an extra 1/4 inch or so around all the edges.

 

 

 

For the front of the crotch I made the lies less curvy and we opted not to add the “pee pocket” (the hole between the layers in the front … you know what it’s for … we just call it the pee pocket) So it’s just a single layer of fabric, which simplifies things a bit. For this project we are upcycle some old t-shirt we have kicking around that are in good shape. 

 

 

 

 

So with our new paper pattern we cut out 2 leg pieces,  1 bum, and 1 crotch piece.  Now because of the nature of the area, you want to keep the seems as flat as possible, so instead of the standard seam I placed them one on top of the other an used a surger type stitch or any other fancy or plane stitch.  First  I stitched the crotch to the bum, and each of the leg seams. 

 

 

 

 

Next I put the legs onto the center pieces, again using the serger stitch on my machine making a flat seam.

 

 

 

 

 

Here’s what they look like with both legs attached

 

 

 

 

 

Next they needed a waistband, for this pair we use a pieces of non-roll elastic.  I stitched the ends together to make a loop and then pinned it to the top of the undies, making sure to stretch it out as you feed it through the machine.  I used an elastic stitch that is on my machine but a plain zig zag work just as well.

 

 

  

So here’s the two pairs I’ve made so far.  the only thing left is to finish the leg openings.  The red pair has just a plain piece of 1 inch elastic.

 

For fun I use some of the finished edges from the bottom of one of the t-shirts, again trying to keep the seams flat. don’t forget to stitch the ends together

 

 

 

 

And voila little boxer briefs!

 

 

 

 

Little Suitcase

 

I found this little suitcase picture on Pintrest there was no instruction an where I could find so I sort of made it up as I went along.

So here is a piece of the picture I found. The original is quite long but you get the idea.

 

Materials used; I used a pillowcase, a old scrub shirt, a pair of old jeans, and a two longish coat zippers I had kicking around.  For my trial run I decided not to use any interfacing or batting between the layers, to save my poor sewing machine some work (denim is quite thick and I find that the standard home sewing machines do not like to many layers of it at one time,   find three is about the max before I start to have problems).

 

So First things first, because I’m using finished garments/linins I have to cut open the finished seams so I can lay the pieces flat.  For this bag I’ve cut down the front seam from the zipper and all the way around that seam to the back, so that the piece I’m left with is one of the back pockets and one off the front pockets (can be seen better in the next picture).  To reduce a little bulk at the waistband of the pants I cut it open leaving enough fabric to attach a lining fabric to (aka the pillowcase). For the back piece of the bag front (the pocket piece forms a large front pocket on the bag front) I cut a piece of the pant leg the same length as the pocket piece, and again to reduce some of the bulk used the pillowcase to line the unseen part at the bottom( this will ultimately be the inside of the large front pocket).

 

Next I pinned the pocket front to the back piece,  trimmed the edges, added the piece for the inside lining (I used the scrub shirt for this) and basted all the pieces  together.  I also cut the back bag and back lining pieces and basted them together. 

This is also a good time to make sure any pockets you want on the inside are sewn in before you baste the pieces together.  And what kind of of handles or  strap you want to attach.  I used so 1 1/2 inch wide twill tape from my stash. 

 

 

Using the the pant legs for the zipper band I made one long rectangle (long enough to fit around the bag) and the matching lining piece.  With both fabric and lining  cut the band to accommodate the zippers.

Because I used two coat zippers I put the tops together at the center top and stitched them in.

 

Next I joined the zipper band to the bag front and back starting from the center top and working my way down each side. this is the time you would add piping to the out side of the bag if you like, you also could sew you seems to the out side and bind them the same way I did it look pretty good too, I did my seem to the inside and no piping.  I made my Bias tape out of some of the pillowcase so it would match, but you could use store bought if you like.  Notice I've left most of the bottom open and free, I'll show you why in a later step.

 

So here you can see the pockets on the inside front and the stitching for my handles, I’ve also started to pin my bias tape around the seems for a nice clean finish inside the bag.  This time I started from the bag bottom and worked my way all around the seem of the bag.  do the same to both sides. 

 

Next I attached the bag bottom to cover the zipper ends from the out side, for this I used a small rectangle of fabric from one one the pant legs. I’m surer there a better way to do this but all in al this worked ok.  I sewed this piece on by machine, just remember not to  sew over the zipper with your machine if you’ve used a large metal zipper like I have.

 

For the inside bottom I used a piece of the pillowcase to match the bias tape, this piece I stitched in by hand

And here she is the finished bag, I think it’s super cute!

Rag Rugs

Ok so last week will I was joy ridding through Pintrest I came across a post for a rag rug, to witch I've been want to make for a while now.  But I'm not particularly motivated to do the traditional braided rug, just to much effort then I wanted to put forth. so I've been on the look out for alternatives, well I found one over at Sugar Bee Crafts.  Now I warn you, I am not the read the instructions kinda gal, so I didn't exactly read it, just sorta skimmed over the pictures. I have enough crochet skills to make basic stitches and on a good day a circle.

So as I said before we love sheets around here (very useful things), so now I had a mission and needed to recruit some "helpers" (I use this term very loosely), I got to work .... I cleaned out my linen closet.  We found some sheets in there I couldn't even identify as mine ... any ways we pulled out the ones that where see through, had no elastic left, or just weren't being used.

  

I found lots of helpers for the next part, for some reason you can always find people to "break" stuff.  we got to making our "yarn" we tore 1" - 1 1/2" strips from our sheets, and rolled them in to balls.

Then I had a bit of a problem finding the giant crochet hooks, I did find them a few days latter at our local fabric shop for a couple of bucks.

This method works up really quickly, It took me and my poor crochet skills about an hour to get the middle done (about a foot to foot and half worth of rug).  Sweet I love instant gratification :)

I can easily get one done in a day in my spare time (ha ha spare time :)

 

 So as it worked out that 3 double/Queen size sheets will get you about a 3 foot round rug, give or take.  I've gotten a few comments on them, my purple and blue one I had made for myself as already been stolen by my son for his room. and the yellow and blue one matches my new curtains, you can see them here and here.

DIY Explorers Play Tent

 
After seeing the play ten tutorials on on Pintrest I thought I would give one a try for my little man, and it give my hubby some thing to channel his energy into.  So we went out to the hardware store for some supplies.  What we came home with was 2 – 1x2’s that were 8 ft long and a 5/8 inch dowel.  When we got home we raided the linen closet, yet again and pulled out this twin sized sheet set.  It kinda reminds me of the turn of the century explorers (i.e.. Indiana Jones) or an African safari.

So now with our materials in hand we headed out for the back yard.  We started  by cutting our 1x2’s in half, so they are roughly 4 ft long, and drilled a hole in one end of each of them.  We used a 5/8 inch drill bit because we wanted to have a sung fit so the dowel didn't fall out of the holes well the kids are playing with it, and we didn’t want to use any glue/hardware because we still wanted to be able to fold it up or take it apart for storage purposes.

Here’s a picture of just the frame, really Simple and supper quick for this part.

And here is a picture of the the sheet over the frame.  This is where all tutorials I saw online stopped, but we decided to add “doors” (flaps that open and close) to the front and back. We also added a tube at the top to run the dowel through, so it wasn’t sliding all over the place. All you do to make the tube is fold the sheet in half and run a line of stitching down the center along the fold, keeping in mind that the tube your making needs to be big enough to run the dowel through.  On mine I sitched about an inch from the fold.

 

As you can see we used the flat sheet for the main tent portion and I used the fitted sheet for the ends.  We started by removing the elastic from the ends and cutting the seams out of the corners.  Then we folded the sheet in half and cut down the center to make two end panels, then we folded each end panel in half and cut to make the opening for the flaps.  Then we finished the ends that would become the opening of the door (fold over twice and stitch), and hemmed up what would become the bottom of the door panels.  For the the closures on the doors we used  Velcro on one side and on the other we used twill tape for ties.

We also add some ties to the side to help support the weight of the sheet on the frame and so we could tie the doors open.

The tent has been a big hit, my kids and all the neighbor kids have been play in it nonstop.  If you make one and add the doors like I did make sure your elastic loops are on the out side of the tent, I have to go back and move mine, but other then that it works great! and cost less then $15.

Pimp my ... Cart ??

   
Well I’m feeling a little crafty again, and with the Wing Ding (community garage sale) coming up I thought it was time to spruce up my shopping cart.  The big problem I’ve always had with these carts is that the holes are so big you lose you bag through them, and well lets face it how snazzy is a cardboard box in the bottom (if you can find  one to fit).  So here is the game plan … I ‘m going to use some old jeans to make a liner.

So first things first … take measurements.  My cart is about 20 inches tall, 12 inches deep, and 16 inches wide.  I drew a little diagram with my measurements on it so I would remember what number went where.

figure out how much fabric we are going to need (how many pant legs).  I used one smaller pant leg for the bottom, and dug up some lager pant legs for the sides.  I gave my self a 1/2 inch for my seam allowance (center picture).  And the picture on the end is Eddie trying to “help”, look at that face  :) .

 

 

I decided to use some bias tape to finish the raw edges and for a little pop of colour, and some twill tape to use as ties to hold it up in the cart.  I did the bias tape on the sides first and then did the top and bottom to keep it neat.  And here is Eddie “helping” again. 

 

Here’s the test run to make sure it fit and that the ties were in the right places, so far I’m happy with how it’s looking.

I made a top flap to hide every thing inside the cart, and decided  not to add any pockets for now, although I may change my mind but for now I’m going to leave it the way it is. I added a tie to the center of the flap so I can tie it down if I want/need too.

Here’s the picture before the flap was attached and all the bias tape done.

and  After, the finished bag, ain’t she purdy.